The list of network adapter features that are enabled on your NIC can be found in the /etc/vmware/esx.conf file on your ESXi Server. Look for the lines that start with /net/vswitch.
However, do not change the default NIC's driver settings unless you have a valid reason to do so. A good practice is to follow any configuration recommendations that are specified by the hardware vendor. Carry out the following steps in order to check the settings:
- Log in to the ESXi host using an SSH client (Putty).
- Open the etc/vmware/esx.conf. file.
- Look for the line that starts with /net/vswitch.
- Your output should look like the following screenshot: