OBJECTIVES
This chapter covers the following CompTIA-specified objectives for the “Media and Topologies” section of the Network+ certification exam:
Recognize the following media connectors and describe their uses:
RJ-11
RJ-45
AUI
BNC
ST
SC
Specific cable types use one or more types of connectors. Being able to identify which connector is associated with which cable is an important skill for a network administrator.
Specify the characteristics (e.g., speed, length, topology, cable type, etc.) of the following 802.3 (Ethernet) standards:
10BaseT
10BaseTX
A wide variety of network media are used in networking. To pass the Network+ exam, you will need to understand the various media types and their characteristics.
Choose the appropriate media type and connectors to add a client to an existing network.
As a network administrator, you will work in a range of environments. Understanding the requirements to connect systems to the network is a key skill.
OUTLINE
Introduction
Media Considerations
Media Interference
Bandwidth
Media Length
Security
Installation and Repair
Baseband Versus Broadband Signaling
Baseband
Broadband
Simplex, Half-Duplex, and Full-Duplex
Common Network Cable
Cable Media
Coaxial Cable
Twisted-Pair
Fiber-optic Cable
Cable Summary
Wireless Media
Radio
Microwave
Infrared Wireless Networking
Media Connectors
D-shell Connectors
Attachment Unit Interface Connectors
External SCSI Connectors
Serial (RS-232) Connectors
Parallel Connectors
RJ Connectors
BNCs
Fiber Connectors
Centronic Connectors
Features and Characteristics of Ethernet 802.3 Standards
10Base2
10Base5
10BaseT
Fast Ethernet: 100BaseX
100BaseTX
100BaseT4
100BaseFX
Fast Ethernet Comparison
Gigabit Ethernet: 1000BaseX
1000BaseT
Choosing the Appropriate Media Connector for Adding Clients to an Existing Network
Chapter Summary
Apply Your Knowledge
STUDY STRATEGIES
Read the objectives at the beginning of the chapter.
Study the information in the chapter, paying special attention to the tables that summarize key information.
Review the objectives again.
Answer the exam questions at the end of the chapter and check your results.
Use the ExamGear test on the CD-ROM that accompanies this book to answer additional exam questions concerning this material.
Review the notes, tips, and exam tips in this chapter. Be sure you understand the information in the exam tips. If you don't understand the topic referenced in an exam tip, refer to the information in the chapter text, and then read the exam tip again.