Annemie Adriaens     Department of Analytical Chemistry, Ghent University, Krijgslaan 281-S12, Ghent, Belgium

Rigoberto C. Advincula     Department of Macromolecular Science and Engineering, Case Western Reserve University, 2100 Adelbert Rd., Cleveland, OH, USA

F.J. Arregui     Sensor Research Laboratory, Electrical and Electronic Engineering Department, Universidad Pública de Navarra, Edif. Los Tejos, Campus Arrosadia, Pamplona, Spain

Imre Bertóti     Department of Plasma Chemistry, Institute of Materials and Environmental Chemistry, Research Centre for Natural Sciences, Hungarian Academy of Sciences, Budapest, Hungary

Kung-Chin Chang     Department of Chemistry, Center for Nanotechnology and Biomedical Technology at Chung-Yuan Christian University (CYCU), Chung Li, Taiwan, ROC

Tami Lasseter Clare     Department of Chemistry, Portland State University, Portland, OR 97207, USA

Attilio M. Compagnoni     Wendel Email Italia, Via Bedeschi 10a, Chignolo (BG), Italy

Alba Covelo     Facultad de Química, Universidad Nacional Autónoma de México, Av. Universidad 3000, Copilco Universidad, Coyoacán, 04510 Ciudad de México, D.F.

Al de Leon     Department of Macromolecular Science and Engineering, Case Western Reserve University, 2100 Adelbert Rd., Cleveland, OH, USA

Flavio Deflorian     Department of Industrial Engineering, University of Trento, via Sommarive 9, Trento, Italy

Eszetr Drotár     Department of Metallurgical and Foundry Engineering, Faculty of Materials Science and Engineering, University of Miskolc, Budapest, Hungary

Miguel Ángel García-Sánchez     Depto. Química, Universidad Autónoma Metropolitana, Av. San Rafael Atlixco No 186, Iztapalapa, Vicentina, 09340 Ciudad de México, D.F.

András Gergely     Department of Metallurgical and Foundry Engineering, Faculty of Materials Science and Engineering, University of Miskolc, Budapest, Hungary

Sunil Kumar Ghosh     Bio Organic Division, Bhabha Atomic Research Centre, Trombay, Mumbai, India, [email protected]

J. Goicoechea     Sensor Research Laboratory, Electrical and Electronic Engineering Department, Universidad Pública de Navarra, Edif. Los Tejos, Campus Arrosadia, Pamplona, Spain

D. Grigoriev     Max-Plank Institute of Colloids and Interfaces, Am Muehlenberg 1, Potsdam-Golm, Germany

I. Gurrappa     Defence Metallurgical Research Laboratory, Kanchanbagh PO, Hyderabad, India

Abdel Salam Hamdy Makhlouf     Department of Manufacturing Engineering, College of Engineering and Computer Science, University of Texas Pan-American, 1201 West University Dr., Edinburg, Texas, USA

M. Hernaez     Sensor Research Laboratory, Electrical and Electronic Engineering Department, Universidad Pública de Navarra, Edif. Los Tejos, Campus Arrosadia, Pamplona, Spain

Miguel Ángel Hernández-Gallegos     Facultad de Ingeniería, Universidad Nacional Autónoma de México, Av. Universidad 3000, Copilco Universidad, Coyoacán, 04510 Ciudad de México, D.F.

L.H. Hihara     Hawaii Corrosion Laboratory, Department of Mechanical Engineering, University of Hawaii at Manoa, Honolulu, Hawaii, USA

Mingxing Huang     School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore

Anthony B. Kaye     Department of Physics, Texas Tech University, Box 41051, Lubbock, Texas, USA

Shengxi Li     Hawaii Corrosion Laboratory, Department of Mechanical Engineering, University of Hawaii at Manoa, Honolulu, Hawaii, USA

Snehal R. Lokhandwala     Shroff S R Rotary Institute of Chemical Technology, Block No. 402, At & Post Vataria, Bharuch, Gujarat, India

I.R. Matías     Sensor Research Laboratory, Electrical and Electronic Engineering Department, Universidad Pública de Navarra, Edif. Los Tejos, Campus Arrosadia, Pamplona, Spain

Carmina Menchaca-Campos     Centro de Investigación en Ingeniería y Ciencias Aplicadas, Universidad Autónoma del Estado de Morelos, Av. Universidad 1001, Col. Chamilpa, 62209 Cuernavaca, Morelos, México

Judith Mihály     Department of Biological Nanochemistry, Institute of Molecular Pharmacology, Research Centre for Natural Sciences, Hungarian Academy of Sciences, Budapest, Hungary

Liana Maria Muresan     “Babes-Bolyai” University, Faculty of Chemistry and Chemical Engineering, Cluj-Napoca, Romania

Zoltán Pászti     Department of Metallurgical and Foundry Engineering, Faculty of Materials Science and Engineering, University of Miskolc, Budapest, Hungary

Jyoti Prakash     Powder Metallurgy Division, Bhabha Atomic Research Centre, Trombay, Mumbai, India

Alberto Quaranta     Department of Industrial Engineering, University of Trento, via Sommarive 9, Trento, Italy

Sandeep Rai     GRP Limited, 510, A Wing, Kohinoor City C-1, Kurla(W), Mumbai, India

P.J. Rivero     Sensor Research Laboratory, Electrical and Electronic Engineering Department, Universidad Pública de Navarra, Edif. Los Tejos, Campus Arrosadia, Pamplona, Spain

Stefano Rossi     Department of Industrial Engineering, University of Trento, via Sommarive 9, Trento, Italy

Mohammed Soltani     RSL-Tech, 9114 Descartes, Montreal, Quebec, Canada

John D. Stenger-Smith     Naval Air Warfare Center Weapons Division (NAWCWD), Polymer Science and Engineering Branch (Code 4L4200D), 1900N. Knox Road (Stop 6303), China Lake, CA, USA

Natasja A. Swartz     Department of Chemistry, Portland State University, Portland, OR 97207, USA

Linda Tavella     Department of Industrial Engineering, University of Trento, via Sommarive 9, Trento, Italy

Atul Tiwari     Department of Mechanical Engineering, University of Hawaii at Manoa, Honolulu, Hawaii, USA

Tamás Török     Department of Metallurgical and Foundry Engineering, Faculty of Materials Science and Engineering, University of Miskolc, Budapest, Hungary

B.M. Tripathi     Powder Metallurgy Division, Bhabha Atomic Research Centre, Trombay, Mumbai, India

Jorge Uruchurtu     Centro de Investigación en Ingeniería y Ciencias Aplicadas, Universidad Autónoma del Estado de Morelos, Av. Universidad 1001, Col. Chamilpa, 62209 Cuernavaca, Morelos, México

Kim Verbeken     Department of Materials Science and Engineering, Ghent University, Technologiepark 903, Zwijnaarde (Ghent), Belgium

Jinglei Yang     School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore

I.V.S. Yashwanth     Defence Metallurgical Research Laboratory, Kanchanbagh PO, Hyderabad, India

Jui-Ming Yeh     Department of Chemistry, Center for Nanotechnology and Biomedical Technology at Chung-Yuan Christian University (CYCU), Chung Li, Taiwan, ROC

C.R. Zamarreño     Sensor Research Laboratory, Electrical and Electronic Engineering Department, Universidad Pública de Navarra, Edif. Los Tejos, Campus Arrosadia, Pamplona, Spain

Roohangiz Zandi Zand     Department of Analytical Chemistry, Ghent University, Krijgslaan 281-S12, Ghent, Belgium

Peter Zarras     Naval Air Warfare Center Weapons Division (NAWCWD), Polymer Science and Engineering Branch (Code 4L4200D), 1900N. Knox Road (Stop 6303), China Lake, CA, USA