Router(config)#l2tp-class [l2tp-class name] | Configures an L2TP class to define the L2TP template |
Router(config-l2tp-class)# authentication | Configures authentication for the L2TP template |
Router(config-l2tp-class)# password [encryption-type] password | Configures a password for L2TP template authentication |
Router(config-l2tp-class)# hello
interval | Configures the interval between L2TPv3 hello packets |
Router(config)# pseudowire-class [name] | Defines/configures the pseudowire class |
Router(config-pw)# encapsulation l2tpv3 | Configures the encapsulation type of the pseudowire to be L2TPv3 |
Router(config-pw)# protocol {l2tpv3 | none} [l2tp-class name] | Configures the protocol for L2TPv3 signaling |
Router(config-pw)# ip local interface
interface type number | Defines the source interface for the tunnel |
Router(config-pw)# ip protocol l2tpv3 | Defines the IP protocol for tunneling packets |
Router(config-if)# xconnect
peer-ip-address
vcid encapsulation {l2tpv3 [manual] | mpls} pw-class
pw-class-name | Configures the attachment circuit parameters |
Router(config-if-xconn)# l2tp id
local-session-id remote-session-id | Configures the local and remote session IDs for the tunnel |
Router(config-l2tp-class)# l2tp cookie local
value | Configures the local L2TP cookie values |
Router(config-l2tp-class)# l2tp cookie remote
value | Configures the remote L2TP cookie value |
Router(config-l2tp-class)# l2tp hello
l2tp-class name | Configures the L2TP hello parameters |
Router(config)# hw-module slot
slot-number
mode server | Configures a specific card on a GSR 12000 series router as a tunnel server card |
Router(config-if)# tunnel mode l3vpn l2tpv3 multipoint | Configures the tunnel mode to dynamic multipoint L2TPv3 |