- Cover Page
- Half Title Page
- Title Page
- Copyright Page
- Preface
- Brief Contents
- Contents
- Chapter 1 Getting Started
- Chapter 2 Fundamentals of 2D Construction
- 2-1 Introduction
- 2-2 Line—Random Points
- 2-3 Erase
- 2-4 Line—Snap Points
- 2-5 Line—Dynamic Inputs
- 2-6 Construction Line
- 2-7 Circle
- 2-8 Circle Centerlines
- 2-9 Polyline
- 2-10 Spline
- 2-11 Ellipse
- 2-12 Rectangle
- 2-13 Polygon
- 2-14 Point
- 2-15 Text
- 2-16 Move
- 2-17 Copy
- 2-18 Offset (See Figure 2-46.)
- 2-19 Mirror (See Figure 2-47.)
- 2-20 Array
- 2-21 Rotate
- 2-22 Trim
- 2-23 Extend
- 2-24 Break
- 2-25 Chamfer
- 2-26 Fillet
- 2-27 Table
- 2-28 Exercise Problems
- Chapter 3 Advanced Commands
- 3-1 Introduction
- 3-2 Osnap
- 3-3 Osnap—Endpoint
- 3-4 Osnap—Snap From
- 3-5 Osnap—Midpoint
- 3-6 Osnap—Intersection
- 3-7 Osnap—Apparent Intersection
- 3-8 Osnap—Center
- 3-9 Osnap—Quadrant
- 3-10 Osnap—Perpendicular
- 3-11 Osnap—Tangent
- 3-12 Osnap—Nearest
- 3-13 Sample Problem SP3-1
- 3-14 Sample Problem SP3-2
- 3-15 Grips
- 3-16 Grips—Extend
- 3-17 Grips—Move
- 3-18 Grips—Rotate
- 3-19 Grips—Scale
- 3-20 Grips—Mirror
- 3-21 Blocks
- 3-22 Working with Blocks
- 3-23 Wblock
- 3-24 Layers
- 3-25 Attributes
- 3-26 Title Blocks with Attributes
- 3-27 Edit Polyline
- 3-28 Edit Spline
- 3-29 Edit Text
- 3-30 Constructing the Bisector of an Angle—Method I
- 3-31 Constructing the Bisector of an Angle—Method II
- 3-32 Constructing an Ogee Curve (S-Curve) with Equal Arcs
- 3-33 Constructing a Parabola
- 3-34 Constructing a Hyperbola
- 3-35 Constructing a Spiral
- 3-36 Constructing a Helix
- 3-37 Designing by Using Shape Parameters
- 3-38 Exercise Problems
- Chapter 4 Sketching
- Chapter 5 Orthographic Views
- 5-1 Introduction
- 5-2 Three Views of an Object
- 5-3 Visualization
- 5-4 Hidden Lines
- 5-5 Hidden Line Conventions
- 5-6 Drawing Hidden Lines
- 5-7 Precedence of Lines
- 5-8 Slanted Surfaces
- 5-9 Projection Between Views
- 5-10 Sample Problem SP5-1
- 5-11 Compound Lines
- 5-12 Sample Problem SP5-2
- 5-13 Oblique Surfaces
- 5-14 Sample Problem SP5-3
- 5-15 Rounded Surfaces
- 5-16 Sample Problem SP5-4
- 5-17 Holes
- 5-18 Holes in Slanted Surfaces
- 5-19 Cylinders
- 5-20 Sample Problem SP5-5
- 5-21 Cylinders with Slanted and Rounded Surfaces
- 5-22 Sample Problem SP5-6
- 5-23 Drawing Conventions and Cylinders
- 5-24 Irregular Surfaces
- 5-25 Sample Problem SP5-7
- 5-26 Hole Callouts
- 5-27 Castings
- 5-28 Sample Problem SP5-8
- 5-29 Thin-Walled Objects
- 5-30 Sample Problem SP5-9
- 5-31 Intersections
- 5-32 Sample Problem SP5-10
- 5-33 Sample Problem SP5-11
- 5-34 Sample Problem SP5-12
- 5-35 Designing by Modifying an Existing Part
- 5-36 Drawing Standards
- 5-37 Third- and First-Angle Projections
- 5-38 Exercise Problems
- Chapter 6 Sectional Views
- 6-1 Introduction
- 6-2 Cutting Plane Lines
- 6-3 Section Lines
- 6-4 Hatch
- 6-5 Sample Problem SP6-1
- 6-6 Styles of Section Lines
- 6-7 Sectional View Location
- 6-8 Holes in Sections
- 6-9 Gradients
- 6-10 Offset Sections
- 6-11 Multiple Sections
- 6-12 Aligned Sections
- 6-13 Drawing Conventions in Sections
- 6-14 Half, Partial, and Broken-Out Sectional Views
- 6-15 Removed Sectional Views
- 6-16 Breaks
- 6-17 Sectional Views of Castings
- 6-18 Exercise Problems
- Chapter 7 Auxiliary Views
- 7-1 Introduction
- 7-2 Projection Between Normal and Auxiliary Views
- 7-3 Sample Problem SP7-1
- 7-4 Transferring Lines Between Views
- 7-5 Sample Problem SP7-2
- 7-6 Projecting Rounded Surfaces
- 7-7 Sample Problem SP7-3
- 7-8 Projecting Irregular Surfaces
- 7-9 Sample Problem SP7-4
- 7-10 Sample Problem SP7-5
- 7-11 Partial Auxiliary Views
- 7-12 Sectional Auxiliary Views
- 7-13 Auxiliary Views of Oblique Surfaces
- 7-14 Secondary Auxiliary Views
- 7-15 Sample Problem SP7-6
- 7-16 Secondary Auxiliary View of an Ellipse
- 7-17 Exercise Problems
- Chapter 8 Dimensioning
- 8-1 Introduction
- 8-2 Terminology and Conventions
- 8-3 Linear Dimension
- 8-4 Dimension Styles
- 8-5 Units
- 8-6 Aligned Dimensions
- 8-7 Radius and Diameter Dimensions
- 8-8 Angular Dimensions
- 8-9 Ordinate Dimensions
- 8-10 Baseline Dimensions
- 8-11 Continue Dimension
- 8-12 Quick Dimension
- 8-13 Center Mark
- 8-14 Mleader and Qleader
- 8-15 Text Angle
- 8-16 Tolerances
- 8-17 Dimensioning Holes
- 8-18 Placing Dimensions
- 8-19 Fillets and Rounds
- 8-20 Rounded Shapes (Internal)
- 8-21 Rounded Shapes (External)
- 8-22 Irregular Surfaces
- 8-23 Polar Dimensions
- 8-24 Chamfers
- 8-25 Knurling
- 8-26 Keys and Keyseats
- 8-27 Symbols and Abbreviations
- 8-28 Symmetry and Centerline
- 8-29 Dimensioning to Points
- 8-30 Coordinate Dimensions
- 8-31 Sectional Views
- 8-32 Orthographic Views
- 8-33 Very Large Radii
- 8-34 Exercise Problems
- Chapter 9 Tolerancing
- 9-1 Introduction
- 9-2 Direct Tolerance Methods
- 9-3 Tolerance Expressions
- 9-4 Understanding Plus and Minus Tolerances
- 9-5 Creating Plus and Minus Tolerances with AutoCAD
- 9-6 Limit Tolerances
- 9-7 Creating Limit Tolerances by Using AutoCAD
- 9-8 Angular Tolerances
- 9-9 Standard Tolerances
- 9-10 Double Dimensioning
- 9-11 Chain Dimensions and Baseline Dimensions
- 9-12 Tolerance Studies
- 9-13 Rectangular Dimensions
- 9-14 Hole Locations
- 9-15 Choosing a Shaft for a Toleranced Hole
- 9-16 Sample Problem SP9-1
- 9-17 Sample Problem SP9-2
- 9-18 Standard Fits (Metric Values)
- 9-19 Nominal Sizes
- 9-20 Hole and Shaft Basis
- 9-21 Sample Problem SP9-3
- 9-22 Standard Fits (Inch Values)
- 9-23 Sample Problem SP9-4
- 9-24 Preferred and Standard Sizes
- 9-25 Surface Finishes
- 9-26 Surface Control Symbols
- 9-27 Design Problems
- 9-28 Exercise Problems
- Chapter 10 Geometric Tolerances
- 10-1 Introduction
- 10-2 Tolerances of Form
- 10-3 Flatness
- 10-4 Straightness
- 10-5 Straightness (RFS and MMC)
- 10-6 Circularity
- 10-7 Cylindricity
- 10-8 Geometric Tolerances Created by Using AutoCAD
- 10-9 Tolerances of Orientation
- 10-10 Datums
- 10-11 Perpendicularity
- 10-12 Parallelism
- 10-13 Angularism
- 10-14 Profiles
- 10-15 Runouts
- 10-16 Positional Tolerances
- 10-17 Virtual Condition
- 10-18 Floating Fasteners
- 10-19 Sample Problem SP10-1
- 10-20 Sample Problem SP10-2
- 10-21 Fixed Fasteners
- 10-22 Sample Problem SP10-3
- 10-23 Design Problems
- 10-24 Exercise Problems
- Chapter 11 Threads and Fasteners
- 11-1 Introduction
- 11-2 Thread Terminology
- 11-3 Thread Callouts (Metric Units)
- 11-4 Thread Callouts (English Units)
- 11-5 Thread Representations
- 11-6 Orthographic Views of Internal Threads
- 11-7 Sectional Views of Internal Thread Representations
- 11-8 Types of Threads
- 11-9 How to Draw an External Square Thread
- 11-10 How to Draw an Internal Square Thread
- 11-11 How to Draw an External Acme Thread
- 11-12 Bolts and Nuts
- 11-13 Screws
- 11-14 Studs
- 11-15 Head Shapes
- 11-16 Nuts
- 11-17 Sample Problem SP11-1
- 11-18 Sample Problem SP11-2
- 11-19 Standard Screws
- 11-20 Setscrews
- 11-21 Washers
- 11-22 Keys
- 11-23 Rivets
- 11-24 Springs
- 11-25 Tool Palettes
- 11-26 Exercise Problems
- Chapter 12 Working Drawings
- 12-1 Introduction
- 12-2 Assembly Drawings
- 12-3 Drawing Formats (Templates)
- 12-4 Title Block
- 12-5 Revision Block
- 12-6 Tolerance Block
- 12-7 Release Block
- 12-8 Parts List (Bill of Materials—BOM)
- 12-9 Detail Drawings
- 12-10 First-Angle Projection
- 12-11 Drawing Notes
- 12-12 Design Layouts
- 12-13 Sample Problem SP12-1
- 12-14 Sample Problem SP12-2
- 12-15 Sample Problem SP12-3
- 12-16 Exercise Problems
- Chapter 13 Gears, Bearings, and Cams
- 13-1 Introduction
- 13-2 Types of Gears
- 13-3 Gear Terminology—Spur
- 13-4 Spur Gear Drawings
- 13-5 Sample Problem SP13-1
- 13-6 Sample Problem SP13-2
- 13-7 Sample Problem SP13-3
- 13-8 Selecting Spur Gears
- 13-9 Center Distance Between Gears
- 13-10 Sample Problem SP13-4
- 13-11 Combining Spur Gears
- 13-12 Gear Terminology—Bevel
- 13-13 How to Draw Bevel Gears
- 13-14 Worm Gears
- 13-15 Helical Gears
- 13-16 Racks
- 13-17 Ball Bearings
- 13-18 Sample Problem SP13-5
- 13-19 Bushings
- 13-20 Sample Problem SP13-6
- 13-21 Cam Displacement Diagrams
- 13-22 Cam Motions
- 13-23 Cam Followers
- 13-24 Sample Problem SP13-7
- 13-25 Exercise Problems
- Chapter 14 Fundamentals of 3D Drawing
- 14-1 Introduction
- 14-2 The World Coordinate System
- 14-3 Viewpoints
- 14-4 Perspective and Parallel Grids
- 14-5 3D Modeling
- 14-6 User Coordinate System (UCS)
- 14-7 Editing a Solid Model
- 14-8 Visual Styles
- 14-9 Rotating a UCS Axis
- 14-10 Sample Problem SP14-1
- 14-11 Visual Errors
- 14-12 Sample Problem SP14-2
- 14-13 Orthographic Views
- 14-14 Line Thickness
- 14-15 Using the Thickness Command to Create Objects
- 14-16 Exercise Problems
- Chapter 15 Modeling
- 15-1 Introduction
- 15-2 Box
- 15-3 Sphere
- 15-4 Cylinder
- 15-5 Cone
- 15-6 Wedge
- 15-7 Torus
- 15-8 Extrude
- 15-9 Revolve
- 15-10 Helix
- 15-11 Polysolid
- 15-12 Loft
- 15-13 Intersect
- 15-14 Union and Subtract
- 15-15 Solid Modeling and UCSs
- 15-16 Combining Solid Objects
- 15-17 Intersecting Solids
- 15-18 Solid Models of Castings
- 15-19 Thread Representations in Solid Models
- 15-20 List
- 15-21 Massprop
- 15-22 Face and Edge Editing
- 15-23 Exercise Problems
- Index
- Chapter 16 Projects
- Appendix
- A-1 Wire and Sheet Metal Gauges
- A-2 American Standard Clearance Locational Fits
- A-3 American Standard Running and Sliding Fits
- A-4 American Standard Transition Locational Fits
- A-5 American Standard Interference Locational Fits
- A-6 American Standard Force and Shrink Fits
- A-7 Preferred Clearance Fits—Cylindrical Fits
- A-8 Preferred Transition and Interference Fits—Cylindrical Fits
- A-9 Preferred Clearance Fits—Cylindrical Fits
- A-10 Preferred Transition and Interference Fits—Cylindrical Fits
- A-11 American National Standard Type A Plain Washers
- A-12 American National Standard Helical Spring Lock Washers
- A-13 American National Standard Internal– External Tooth Lock Washers
- A-14 British Standard Bright Metal Washers— Metric Series
- A-15 American National Standard and Unified Standard Square Bolts
- A-16 American National Standard and Unified Standard Hex Head Screws
- A-17 Coarse-Thread Series, UNC, UNRC, and NC—Basic Dimensions
- A-18 Fine-Thread Series, UNC, UNRC, and NC—Basic Dimensions
- A-19 American National Standard General-Purpose Acme Screw Thread Form—Basic Dimensions
- A-20 60° Stub Threads
- A-21 American National Standard Slotted 100° Flat Countersunk Head Machine Screws
- A-22 American National Standard Slotted Truss Head Machine Screws
- A-23 American National Standard Plain and Slotted Hexagon Head Machine Screws
- A-24 Slotted Round Head Machine Screws
- A-25 American National Standard Square Head Setscrews
- A-26 American National Standard Square Head Setscrews
- A-27 American National Standard Slotted Headless Setscrews
- A-28 Lengths for Threaded Fasteners
- A-29 Lengths for Metric Threaded Fasteners
- A-30 American National Standard Square and Hexagon Machine Screw Nuts
- A-31 Standard Twist Drill Sizes (Inches)
- A-32 Standard Twist Drill Sizes (Millimeters)
- A-33 Metric Threads—Preferred Sizes
- A-34 Standard Thread Sizes—Inches
- A-35 Thread Lengths
- A-36 Fasteners—Standard Lengths
- A-37 American National Standard Plain Washers
- A-38 Flat Washers—Metric Sizes
- Code Snippets
Appendix
Figure A-1
Figure A-2A
Figure A-2B
Figure A-3A
Figure A-3B
Figure A-4A
Figure A-4B
Figure A-5
Figure A-6
Figure A-7
Figure A-8
Figure A-9
Figure A-10
Figure A-11
Figure A-12
Figure A-13
Figure A-14
Figure A-15
Figure A-16
Figure A-17
Figure A-18
Figure A-19
Figure A-20
Figure A-21
Figure A-22
Figure A-23
Figure A-24
Figure A-25
Figure A-26
Figure A-27
Figure A-28
Figure A-29
Figure A-30
Figure A-31
Figure A-32
Figure A-33
Figure A-34
Figure A-35
Figure A-36
Figure A-37
Figure A-38
-
No Comment
..................Content has been hidden....................
You can't read the all page of ebook, please click here login for view all page.