Let's walk-through the steps to utilize client-node1 as an NFS-Ganesha server to export Ceph FS as NFS:

1. On ceph-node1, install the packages required for nfs-ganesha:

        # sudo yum install -y nfs-utils nfs-ganesha

2. Since this is a test setup, disable the firewall. For the production setup, you might consider enabling the required ports over a firewall, which is generally 2049:

        # systemctl stop firewalld; systemctl disable firewalld

3. Enable the rpc services required by NFS:

        # systemctl start rpcbind; systemctl enable rpcbind
        # systemctl start rpc-stat.d.service

4. Create the NFS-Ganesha configuration file, /etc/ganesha.conf, with the following content:

5. Finally, start the NFS Ganesha daemon by providing the ganesha.conf file that we created in the last step. You can verify the exported NFS share using the showmount command:

        # ganesha.nfsd -f /etc/ganesha.conf -L /var/log/ganesha.log -N NIV_DEBUG
        # showmount -e

Let's recall the steps that we have taken: ceph-node2 has been configured as Ceph MDS, and ceph-node1 has been configured as the NFS-Ganesha server. Next, in order to mount the NFS share on the client machines, we just need to install the NFS client packages and mount the share exported by ceph-node1, as shown next:

Install the NFS client packages on client-node1 and mount:

        root@client-node1 # yum install -y nfs-utils
                          # mkdir /mnt/cephfs
                          # mount -o rw,noatime 10.19.1.101:/ /mnt/cephfs