140 6. EXAMPLE PRACTICAL PROCEDURES AND RESULTS
• Chou GP, Lin YC (1993). Brief Approach for Aluminum Alloy Materials in Ultra-high-
speed Hole-Drilling Technique. Experimental Techniques, 17(5):17–20.
• Whitney TJ, Stenger GJ (1993). A Device for Implementing the Strain Gage-hole
Drilling Method of Residual Stress Measurement on Aircraft Transparencies. Experimen-
tal Techniques, 17(4):25–30.
• Nobre JP, Kornmeier M, Dias AM, Scholtes B (2000). Use of the Hole-Drilling Method
for Measuring Residual Stresses in Highly Stressed Shot-peened Surfaces. Experimental
Mechanics, 40(3):289–297.
• Valente T, Bartuli C, Sebastiani M, Loreto A (2005). Implementation and Development
of the Incremental Hole Drilling Method for the Measurement of Residual Stress in er-
mal Spray Coatings. Journal of ermal Spray Technology, 14(4):462–470.
• Fontanari V, Frendo F, Bortolamedi T, Scardi P (2005). Comparison of the Hole-Drilling
and X-ray Diffraction Methods for Measuring the Residual Stresses in Shot-peened Alu-
minium Alloys. e Journal of Strain Analysis for Engineering Design, 40(2):199–209.
• Sharman ARC, Hughes JI, Ridgway K (2006). An Analysis of the Residual Stresses
Generated in Inconel 718™ When Turning. Journal of Materials Processing Technology,
173(3):359–367.
• Stefanescu D, Truman CE, Smith DJ, Whitehead PS (2006). Improvements in Residual
Stress Measurement by the Incremental Center Hole Drilling Technique. Experimental
Mechanics, 46(4):417–427.
• Rajendran R, Baksi P, Bhattacharya S., Basu S (2008). Evaluation of Non-uniform Resid-
ual Stress using Blind-hole Drilling Technique. Experimental Techniques, 32(3):58–61.
• Whitehead PS (2010). Practical Experiences in Hole Drilling Measurements of Resid-
ual Stresses. Proc. of the SEM Annual Conference, Society for Experimental Mechanics,
6(17):209-219, Indianapolis, IN, June 7–10.
• Valentini E, Beghini M, Bertini L, Santus C, Benedetti M (2011). Procedure to Perform a
Validated Incremental Hole Drilling Measurement: Application to Shot Peening Residual
Stresses. Strain, 47(s1):e605–e618.
• Scafidi M, Valentini E, Zuccarello B (2011). Error and Uncertainty Analysis of the Resid-
ual Stresses Computed by Using the Hole Drilling Method. Strain, 47(4):301–312.
• Nau A, Scholtes B (2013). Evaluation of the High-speed Drilling Technique for the In-
cremental Hole-Drilling Method. Experimental Mechanics, 53(4):531–542.