Raspberry Pi 3 Model B+ supports two types of network connection—through ethernet and through WiFi. Connecting the IoT Box through ethernet is simple; you just need to connect your the IoT Box with the RJ45 Ethernet cable, and the IoT Box is then ready to be used. Connecting the IoT Box through WiFi is complicated as you might not have a display attached to it. Perform the following steps to connect the IoT Box through WiFi:

1. Connect the IoT Box with the power supply (if the ethernet cable is plugged in to the IoT Box, remove it and restart the IoT Box).

2. Open your computer and connect to the WiFi network, named IoTBox, as shown in the following screenshot (no password is needed):

3. After connecting to the WiFi, you'll see a popup with the IoT Box home page like the following screenshot (if this does not work, open the IP address of the box in the browser):

4. Set the IoT Box Name and keep the Server token empty, then click on Next. This will redirect you to a page where you can see a list of WiFi networks:

5. Select the WiFi Network you want to connect to and fill in the Password. After doing this, click on the Connect button. If you entered the correct information, you will be redirected to the final page:

After performing these steps, your IoT Box is connected to the network and ready to be integrated with the Odoo instance.