[1] Sunden B. Introduction to heat transfer. UK: WIT Press; 2012.
[2] Incropera F.P, DeWitt D.P, Bergman T, Lavine A. Introduction to heat transfer. 5th ed. New York: J. Wiley & Sons; 2007.
[3] Pohlhausen E. Der Wärmeaustausch zwischen festen Körpern und Flüssigkeiten mit kleiner Reibung und kleiner Wärmeleitung. Z Angew Math Mech. 1921;1:115–121.
[4] Kaye J. Survey of friction coefficients, recovery factors and heat transfer coefficients for supersonic flow. J Appl Sci. 1954;21:117–119.
[5] Eckert E.R.G. Engineering relations for heat transfer and friction in high-velocity laminar and turbulent boundary layer flow over surface with constant pressure and temperature. Trans ASME. 1956;78:1273–1284.
[6] Bapanapalli SK, Martinez OA, Gogu C, Sankar BV, Haftka RT, Blosser ML. Analysis and design of corrugated-core sandwich panels for thermal protection systems of space vehicles, 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Material Conference, Newport, Rhode Island, May 1–5, Paper No. 2006-1876.
[7] Martinez O.A, Sankar B.V, Haftka R.T, Bapanapalli S.K, Blosser M.L. Micromechanical analysis of composite corrugated-core sandwich panels for integral thermal protection systems. AIAA J. 2007;45:2323–2336.
[8] Martinez O.A, Sankar B.V, Haftka R.T, Blosser M.L. Thermal force and moment determination of an integrated thermal protection system. AIAA J. 2010;48:119–128.
[9] Martinez O.A, Sankar B.V, Haftka R.T, Blosser M.L. Two-dimensional orthotropic plate analysis for an integral thermal protection system. AIAA J. 2012;50:387–398.
[10] Gogu C, Bapanapalli S.K, Haftka R.T, Sankar B.V. Comparison of materials for an integrated thermal protection system for spacecraft re-entry. AIAA J Spacecr Rockets. 2009;46:501–513.
[11] Poteet C.C, Abu-Khajeel H, Hsu S.Y. Preliminary thermal-mechanical sizing of metallic TPS: process development and sensitivity studies. In: 40th Aerospace Sciences Meetings & Exhibitions, Reno, Nevada, January 14–17, Paper No. AIAA 2002–0505. 2002.
[12] Daryabeigi K. Heat transfer in high-temperature fibrous insulation. In: 8th AIAA/ASME Joint Thermophysics and Heat Transfer Conference. 2002 St. Louis, MO, June 24–26, Paper No. AIAA 2002–3332.
[13] Johnson T.F, Waters W.A, Singer T.N, Haftka R.T. Thermal-structural optimization of integrated cryogenic propellant tank concepts for a reusable launch vehicle. In: 45th AIAA/ASME/ASCE/AHS/ASC Structure, Structure Dynamics, and Materials Conference, Palm Springs, CA, April 19–22, Paper No. 2004–1931. 2004.
[14] Grujicic M, Zhao CL, Biggers SB, Kennedy JM, Morgan DR. Heat transfer and effective thermal conductivity analyses in carbon-based foams for use in thermal protection systems. Proc Inst Mech Eng Part L J Mater Des Appl, 219(4):217–230.
[15] Myers DE, Martin CJ, Blosser ML. Parametric weight comparison of advanced metallic, ceramic tile, and ceramic blanket thermal protection systems. NASA Technical Memorandum, Paper No. NASA TM-2000–210289.
[16] Xie G, Wang Q, Sunden B, Zhang W. Thermomechanical optimization of lightweight thermal protection system under aerodynamic heating. Appl Therm Eng. 2014;59:425–434.
[17] Aruna S, Anjali Devi S.P. A computational study on reduction of aerodynamic heating and drag over a blunt body in hypersonic turbulent flow using counter jet flow. Int J Aerodyn. 2012;2(2/3/4):240–276.
[18] Imoto T, Okabe H, Aso S, Tani Y. Enhancement of aerodynamic heating reduction in high enthalpy flows with opposing jet. In: AIAA 2011-346 (49th AIAA Aerospace Sciences Meeting Including New Horizons Forum and aerospace Exposition, Orlando, Florida). 2011.
[19] Morimoto N, Aso S, Tani Y. Reduction of aerodynamic heating and drag with opposing jet through extended nozzle in high enthalpy flow. In: 29th Congress of the International Council of the Aeronautical Sciences (ICAS), St Petersburg, Russia. 2014.