Keep track of your part review progress with the checklist in Table P1-1. Details about each task follow the table.
Activity |
1st Date Completed |
2nd Date Completed |
Repeat All DIKTA Questions |
|
|
Answer Part Review Questions |
|
|
Review Key Topics |
|
|
Do Labs |
|
|
For this task, use the PTP software to answer the “Do I Know This Already?” questions again for the chapters in this part of the book.
For this task, use PTP to answer the Part Review questions for this part of the book.
Review all key topics in all chapters in this part, either by browsing the chapters or by using the Key Topics application on the companion website.
Depending on your chosen lab tool, here are some suggestions for what to do in the lab:
Pearson Network Simulator: If you use the full Pearson CCNA simulator, focus more on the configuration scenario and troubleshooting scenario labs associated with the topics in this part of the book. These types of labs include a larger set of topics and work well as Part Review activities. (See the Introduction for some details about how to find which labs are about topics in this part of the book.)
Config Labs: In your idle moments, review and repeat any of the Config Labs for this book part in the author’s blog; navigate to blog.certskills.com/config-labs for instructions on how to navigate to the labs.
Other: If you are using other lab tools, here are a few suggestions: when building ACL labs, you can test with Telnet (port 23), SSH (port 22), ping (ICMP), and traceroute (UDP) traffic as generated from an extra router. So, do not just configure the ACL; make an ACL that can match these types of traffic, denying some and permitting others, and then test.