Where to Obtain Tools and Parts
Lots of different parts and lots of different tools are needed to build high-quality robots.
If something is frustrating or difficult to make, or is otherwise turning out badly, then either you are using the wrong tool or you are using it incorrectly. In fact, some jobs are literally impossible without the right instrument. Using the correct tools in the correct manner makes almost any job fast and easy.
The same principle applies to parts. There are an infinite number of materials that you can employ to build a robot or provide a particular feature. It’s important to choose materials that will make your robot more robust, adaptable, and less expensive.
Often, the greatest barrier is not knowing that a tool or part exists.
Ordering Free Information
A good place to start is to puruse online stores (see Figure 2-1). Even after you get to know a site, you should occasionally check their new product sections for updates. These stores aren’t just for ordering, they can also be a source of information.
Figure 2-1. Some component and tool sites
With the exception of LEGO, the companies in Table 2-1 carry products from many different manufacturers. As you begin to discover a personal preference for a particular manufacturer’s parts, check the manufacturer’s web site to see if they have any application notes or even free sample parts.
Table 2-1. Online Component and Tool Stores
Company |
Category |
Website |
---|---|---|
Digi-Key |
electronics | |
All Electronics |
electronics, surplus | |
B. G. Micro |
electronics, surplus | |
Jameco Electronics |
electronics | |
Electronix Express |
electronics | |
Electronic Goldmine |
electronics | |
Mouser Electronics |
electronics | |
Marlin P. Jones |
electronics, surplus | |
Micro-Mark |
tools, materials | |
McMaster-Carr |
tools, materials | |
MSC Industrial Supply |
tools, materials | |
Small Parts |
tools, materials | |
Micro Fasteners |
fasteners (screws) | |
Solarbotics |
kits, parts | |
SparkFun |
kits, parts | |
Adafruit Industries |
kits, parts | |
Tower Hobbies |
R/C, batteries, motors | |
LEGO Shop At Home |
kits, parts |
Discovering Hidden Messages
Besides their obvious sales content, online stores also provide an education. Since every square inch of page costs money to write and maintain, the companies try to focus on the data that is most relevant for comparison and purchase. Interestingly, sometimes what’s not there is as important as what is there.
Considering Columns
If you want to know the most significant differences in a family of parts, just check out the tables the online companies create to compare them.
Hmm, if color, wavelength, dimensions, and brightness are all listed for LEDs, then those must be some of the most distinguishing characteristics between types of LEDs. Weight isn’t listed, because that isn’t a common concern for LEDs.
Counting Parts
Another subtle message contained in an online store is the number of parts available for a particular family or category. If there are a lot of surface-mount capacitors listed, you can infer that enough people are buying enough of those parts to be worth stocking them.
The amount of space given to a variation of parts can also be noteworthy. If there are twenty lines of text dedicated to one variation of a part, but only one line of text for another part, perhaps the one-line variation has an unnoticed limitation.
On a sad note, if your favorite parts or packages seem to be receiving less and less coverage, perhaps something is changing in the industry. It might be worth investigating whether that particular piece of technology is fading away.
Comparing Prices
The price list also tells a story. The chips listed in Table 2-2 all provide the identical logic function. So why the huge range in price?
Table 2-2. Single-Unit Prices for the Same Chip Function
Chip |
Price |
---|---|
7400 |
109 cents |
74LS00 |
56 cents |
74HC00 |
45 cents |
74AC00 |
50 cents |
74AUC00 |
88 cents |
Researching the plain 7400 chip reveals that it uses the most power, provides poor high-output current, and has no feature better than the other chips. Why is it the most expensive? Because it’s obsolete. It’s a really old design. If you’re among the few people who still want that part, the lack of sales volume is going to cost you.
The lowest price on this list happens to be for a technology, 74HC00, that is very popular and has fully matured. Rounding out the bell curve is the newest technology, 74AUC00, which isn’t selling yet at a high enough volume to bring down the price.
Of course, there are exceptions. With labor-intensive or rare-material parts, higher prices may be an indication of better quality parts rather than obsolescence or the latest technology.
You can spend money more efficiently by:
When purchasing inexpensive components, think about purchasing in quantities larger than you need for a single project. In quantities of 100, many components are half the price of a single piece (see Figure 2-2). Some components cost so little (such as resistors) that they often aren’t available in quantities fewer than 10.
Figure 2-2. Sharp drop in component price with quantity
Consider informally organizing a group to buy a larger quantity of a particular item. Not only will each individual lower the unit cost of their parts, but also the group splits the shipping costs.
I try to support my local hardware and hobby stores so that they will be there when I need them. There are some items, such tools and body materials, that are better to examine in person.
Most online companies offer better prices than retail stores because the stock is consolidated and is warehoused at a few low-rent locations. Since customers aren’t walking through the aisles, the products can be stored more densely and needn’t be packaged attractively.
Watch out for minimum order amounts. Most online companies charge a handling fee below a certain total order size. The minimum order size is often $20 to $25. Also, consider the cost of shipping. It tends to have a significant base price that grows relatively slowly with weight.
In summary, by consolidating smaller orders into a single purchase and by buying in larger quantities, the per-unit price of components can be dramatically reduced. Simply plan ahead or combine orders with friends or local club members.