Perform the following steps to install an IoT Box image onto your SD card:
- Insert a microSD card into your computer (use an adapter if your computer doesn't have a dedicated slot).
- Download the IoT Box image from Odoo's nightly builds. The image is available at https://nightly.odoo.com/master/iotbox/.
- Download and install Balena Etcher on your computer. You can download this from https://www.balena.io/etcher/.
- Open Balena Etcher, select the IoT Box image, and choose to flash your microSD card. You'll see the following screen:
- Click on the Flash! button and wait until the process completes.
- Remove the microSD card and place it in Raspberry Pi.
After the given steps, your microSD card is loaded with the IoT Box image and is ready to be used in the IoT Box.